Hydra Electric Vehicle Chargers

EASTRON SDM630MCT-MOD-MID Power Meter

The SDM630MCT Series is a three-phase multifunction DIN-rail meter. It can measure and display the characteristic of 1p2w,3p3wand 3p4wsupplies, including voltage, current, power, active and reactive energy imported or exported. Energy is measured in terms of kWh, kVarh. Max demand current can be measured over preset periods of up to 60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the meter. The required current inputs are obtained via current transformers. This meter can be configurable to work with a wide range of CTs, giving the unit a wide range of operations. The built-in interface provides pulse and RS485 Modbus or RTU/Mbus outputs. All the configuration is password protected. This meter is perfect for DBs and Switchgears

SDM630 CT Series have been assessed and certified as meeting the requirements of EC Directive 2014/32/EU. The instrument traceable number is 0120/SGS0142

  • MID B&D Approved – 0120/SGS0150
  • Single Phase (1P2W) or Three Phase (3P3W or 3P4W)
  • Multifunction Meter (16 different parameters)
  • CT Operated (1A or 5A secondary – settable)
  • 230/400V AC
  • RS485 Modbus RTU
  • Dual Pulse Outputs built-in
  • 4-DIN Module
  • Digital Backlit Display
  • Touch Screen Buttons
Price (+VAT)

Call for Price

FAQ

Our domestic Hydra Zodiac EV charger is priced as indicated (+VAT and installation). Almost all of our commercial EV chargers are configurable to the customer’s requirements and the cost will also be influenced by the type and location of the installation, power input and charging output required. Therefore we will provide a quote upon request.

We work with a nationwide network of Hydra approved and OZEV registered installers for both domestic and commercial EV chargers. We are able to recommend a suitable installer for your location and type of installation. We can also communicate with your chosen installation team to make sure they have everything you need to carry out a smooth installation. Every installation will be subject to a site survey by a qualified installer.

No, only fully qualified electricians should carry out the installation of EV charging equipment. We also advise that you should only choose OZEV approved installers. We work with a nationwide network of Hydra approved and OZEV registered installers.

In most instances no planning permission is required to install an EV chargepoint in a domestic or residential location, but it is always worth checking with your Local Council Planning Department to ensure there are no local restrictions in place.

See Planning Portal for more information: https://www.planningportal.co.uk/permission/common-projects/electrics/electric-vehicle-charging-points

If you live in rented accommodation or rent a commercial property you should always gain permission of the Landlord and/or leaseholder before installing EV charging equipment.

Almost all private residential property - and an amount of commercial properties such as high street shops and offices - operate on the standard single-phase 240v electrical supply. If this is the case you will be limited to using a 7kW charger such as the Hydra Zodiac. However, larger shops, offices, industrial premises and warehouses are linked to a three-phase 400v supply which will allow for the installation and use of a higher powered EV charger.

No, all Hydra EV chargers draw a minimal 2W on standby. They are also protected with multiple built-in safety features which mean it is safe to leave the EV charger unattended for prolonged use.

All Hydra EV chargers can charge a range of EVs from private cars to electric mopeds and commercial vans to HGV delivery trucks. Anything that takes a regular Type 2 charger can be connected. For commercial and public installations access to the charger can be activated by the use of a contactless RFID card thus preventing unauthorised use.

Do you have any questions?