FAST AC CHARGING
Hydra
CUBUS
Socket or tethered 7kW / 22kW Fast AC charging
• Recharge in 5 hours (7kW) (i)
• Installed and fully managed from £000/month
Type B DC 6mA + 30mA AC leakage protector
Flexible startup modes: RFID card or keyfob, smartphone APP or plug and charge
Dynamic load balancing management and Solar PV matching function
Wi-Fi, Ethernet and 4G connectivity as standard
Save on electricity bills by scheduling off-peak or tariff-based charging sessions
Built-in O-Pen protection ensures a quick installation with no extra cost for an earth rod
Hierarchical maintenance design makes the maintenance and replacement much easier
OCPP compliant and compatible with most of the EV charging management platforms
Over-current, over-voltage, short circuit protection, etc., make charging much safer
Works with Octopus Energy Agile Tariff
260 x 260 x 100mm
Datasheet-Hydra-CUBUS
DC charging
7kW / 22kW
Networkable
Single output
Solar PV
PEN protection
IP55/IP65
UV protection
3G/4G SIM
Wi-Fi
Ethernet
RFID access
The HYDRA CUBUS 7.4kW / 11kW / 22kW EV charger is designed specifically for the UK market for HOME and COMMERCIAL charging requirements with compact, modern, and full-function design.
The CUBUS fulfils all the charging requirements you need in a compact and modern design, which neatly hides its powerful and future-proof specification.
Easy Installation
The Cubus has been designed with the installer in mind. Attach it to the wall, and then a small panel on the faceplate is removed, allowing the power cable to be connected. There is no need to open up the entire unit.
Built-in Load Management
Dynamic Load Balancing comes as standard. The Cubus monitors household power demand and can dynamically alter the power of the charge point to accommodate the fluctuations in demand.
This ensures the homeowner never has to worry about the charger drawing too much power, even when charging at peak times.
Solar Compatibility
The Cubus is fully solar compatible and can communicate with and prioritise power from Solar PV and Battery Storage systems.
It can be set to only charge from solar power, prioritise solar but draw from the grid where necessary and fast charging where power will be drawn from the most efficient source for faster charge times.
O-Pen Protection
Fault protection is mandatory, but some chargepoints require external earthing connections. The Cubus has built-in O-Pen protection, backed up by built-in Type B RCD.
Flexible Connectivity
The Cubus can communicate via Bluetooth, Wi-Fi, wired Ethernet cable or 4G SIM to our smartphone app and monitoring and management platforms.
Charging functions can also be controlled with RFID cards or keyfobs, making it quick and easy for the EV driver to start charging with as little fuss as possible.
The HYDRA CUBUS 7.4kW / 11kW / 22kW EV charger is designed specifically for the UK market for HOME and COMMERCIAL charging requirements with compact, modern, and full-function design.
The CUBUS fulfils all the charging requirements you need in a compact and modern design, which neatly hides its powerful and future-proof specification.
Easy Installation
The Cubus has been designed with the installer in mind. Attach it to the wall, and then a small panel on the faceplate is removed, allowing the power cable to be connected. There is no need to open up the entire unit.
Built-in Load Management
Dynamic Load Balancing comes as standard. The Cubus monitors household power demand and can dynamically alter the power of the charge point to accommodate the fluctuations in demand.
This ensures the homeowner never has to worry about the charger drawing too much power, even when charging at peak times.
Solar Compatibility
The Cubus is fully solar compatible and can communicate with and prioritise power from Solar PV and Battery Storage systems.
It can be set to only charge from solar power, prioritise solar but draw from the grid where necessary and fast charging where power will be drawn from the most efficient source for faster charge times.
O-Pen Protection
Fault protection is mandatory, but some chargepoints require external earthing connections. The Cubus has built-in O-Pen protection, backed up by built-in Type B RCD.
Flexible Connectivity
The Cubus can communicate via Bluetooth, Wi-Fi, wired Ethernet cable or 4G SIM to our smartphone app and monitoring and management platforms.
Charging functions can also be controlled with RFID cards or keyfobs, making it quick and easy for the EV driver to start charging with as little fuss as possible.
Make an enquiry ...
(i) Based on charging a standard EV with 50kWh battery from 20% to 80% with a 22kW CUBUS. AC charging times are dependent on the EV’s onboard charger, some are limited to 7kW or 11kW maximum
